Insulation resistance measuring device

Insulation resistance measurement on insulation materials, electrical devices and operating equipment.

Insulation resistance measuring device

Insulation resistance measurement on insulation materials, electrical devices and operating equipment.

There are numerous cables and conductors in every electrical device; their safety is of special importance. Damage can cause serious injuries to people and other living beings. The insulation of the conductors is of particular importance. This is generally made up of an insulating layer and sheaths the conductive elements of a device. It is thus important to be able to guarantee intact insulation through measuring devices with modern test technology before products are put on the market.

This is possible with the aid of an insulation resistance measuring device. Insulation resistance measurement is carried out on devices of protection class I and II. The test is especially important for class II devices since these do not have a PE conductor for earthing in the event of damage. Touching a device with faulty insulation can have fatal consequences.

Isolationswiderstandsgeräte Übersicht

Insulation resistance measuring devices

Isolationswiderstand-90-2e 2

Insulation resistance devices 90-2E

For insulation resistance measurement on insulating materials, electrical devices, and equipment.
Isolationswiderstandsgeraet-90-4K 2

Insulation resistance devices 90-4K

For insulation resistance measurement on insulating materials, electrical devices, and equipment.

What is an insulation resistance measuring device?

With the aid of an insulation resistance measuring device it is possible to apply voltage to the device conductors. The higher the insulation resistance measured in ohms, the better the result. If the insulation resistance increases, this means no fault current is flowing and the insulation is intact.

An insulation resistance measuring device can be used to determine deviations from standard values. Such a deviation is a clear sign of damage to the insulation. Such a device must not get into the shops and must be repaired. The measuring device works with high voltage inputs to be able to determine the insulation resistance. Such devices work exclusively with direct current.

Insulation resistance should always be measured using appropriate measuring devices before electrical devices are delivered. There is a legal obligation to test new devices, with requirements specified in DIN/EN standards. Beyond this, measurement of the insulation resistance is important following any modification or return to service of a device (VDE701/702).

The insulation can also become damaged during repairs. Equally, a repeat test should be performed on used devices for reasons of safety.

The use of an insulation measuring device

Isolationswiderstandsgeraet-90-4K 4

With the aid of an insulation resistance measuring device it is possible to measure the extent to which the insulation of an electrical test specimen is working. The test is always carried out with DC voltage.

In most cases a DC voltage of 500V DC is used.

The insulation resistance is determined. The insulation resistance should not fall below a minimum value. The higher the insulation resistance, the higher the quality of the insulation and the test result is good.

Depending on the standard used, the necessary test voltage and the required limit value of the insulation resistance can be set.

How an insulation resistance measuring device works?

Isolationswiderstand-90-2e 4

These are the ELABO devices

ELABO offers various devices in the field of insulation resistance measurement. These are available combined with a housing for mobile use or as a slide-in unit for a test equipment cabinet The model 90-2E tests with a voltage of 500V DC and adjustable limit values for insulation resistance. The model 90-4K on the other hand makes adjustable test voltage between 500 - 1000 volts direct current possible. Here is an overview list of the respective values for the two devices.

Das Modell 90-4K hingegen ermöglicht eine einstellbare Prüfspannung zwischen 500 - 1000 Volt Gleichstrom. Nachfolgend eine Auflistung der jeweiligen Werte der beiden Geräte als Übersicht:
 

  • Test voltage:
    90-2E    : 500 volts direct current
    90-4K: 500–550/500–1,000 volts direct current
  • Measuring ranges:
    90-2E    : 0–10+100 megaohm
    90-4K: 0–10/100/1.000 megaohm
  • Test current:
    90-2E    : <3 milliampere
    90-4K: <12 milliampere
  • Gewicht:
    90-2E    : 1,3 Kilogramm
    90-4K: 2,8 Kilogramm
Further information about the insulation resistance measuring devices
Titel Mess- und Prüfgeräte
Measuring and testing devices (PDF, 28 MB)
Download

Do you have any questions? Then write to us!

You wish a consultation via
You need information or support
Do you have any questions for us or would you like to provide feedback or suggestions?
Consent Declaration
Privacy Policy
Read here: https://www.elabo.de/datenschutzerklaerung/